AV_Setup

In the 'Scenes' section, press 'View'

Load [WCCEC CM 2026]

Piano - if there is no sound, ensure 48V phatom power is "on"

Pianist - do not mute.  Fader MUST be at the bottom, so that no audio from this input goes to the congregation.

Guitar - this MUST be 'muted' until the guitar is plugged in

Other inputs - only unmute if in use. 

Faders for active inputs (except pianist) should be in the middle position, adjust input gain for each singer until 2 green lights show on the meter.  (Note - the singer should sing into the microphone at their loudest voice.)

Bass - this MUST be 'muted' until the bass guitar is plugged in

Inputs 29 and 30 MUST be "on" (unmuted) with 48V enabled, and faders at the bottom

Faders for active inputs (except channels 29 and 30) should be in the middle position, adjust input gain for each singer until 2 green lights show on the meter.  (Note - the singer should sing into the microphone at their loudest voice.)

Click button for Bus 9-16

Unmute Bus 13 and Bus 14 during singing

Mute Bus 13 and Bus 14 during speaking

Go to Bus 1-8

Bus 1 (wireless in ear monitors) should be unmuted

Bus 6 (passive stage monitors) should be unmuted

To adjust instrument and vocal mix, select Bus 1 or Bus 6, press "Sends on Fader" and adjust levels as needed for inputs 1-32